Is it possible to lock command, protect cloning or not erasable by other app for MIFARE card 1k

I want to do this to protect the card from erasable or cloning the card. I read many documents Some tell the user the fourth block to set permission to reading and write..

According to @Michael Roland

The authentication keys and the access conditions for each sector of a MIFARE card are located in the last block of that sector (the sector trailer). You can update this block with new access conditions and authentication keys using a regular write command.

The sector trailer looks like this:

+-----------------------------+--------------+----+-----------------------------+
|  0 |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 | 10 | 11 | 12 | 13 | 14 | 15 |
+-----------------------------+--------------+----+-----------------------------+
|            Key A            | Access Bits  | GP |            Key B            |
|          (6 bytes)          |  (3 bytes)   | B  |          (6 bytes)          |
+-----------------------------+--------------+----+-----------------------------+

So the access bits are located in byte 6-8 and look like this:

        +-------+-------+-------+-------+-------+-------+-------+-------+
        | Bit 0 | Bit 1 | Bit 2 | Bit 3 | Bit 4 | Bit 5 | Bit 6 | Bit 7 |
        +-------+-------+-------+-------+-------+-------+-------+-------+
Byte 6: | nC2_3 | nC2_2 | nC2_1 | nC2_0 | nC1_3 | nC1_2 | nC1_1 | nC1_0 |
        +-------+-------+-------+-------+-------+-------+-------+-------+
Byte 7: |  C1_3 |  C1_2 |  C1_1 |  C1_0 | nC3_3 | nC3_2 | nC3_1 | nC3_0 |
        +-------+-------+-------+-------+-------+-------+-------+-------+
Byte 8: |  C3_3 |  C3_2 |  C3_1 |  C3_0 |  C2_3 |  C2_2 |  C2_1 |  C2_0 |
        +-------+-------+-------+-------+-------+-------+-------+-------+

Where nCx_y = not Cx_y and "C1_x, C2_x, C3_x" is the access condition for block x:

C1_3, C2_3, C3_3: sector trailer (block 3 in this sector)
C1_2, C2_2, C3_2: block 2 in this sector
C1_1, C2_1, C3_1: block 1 in this sector
C1_0, C2_0, C3_0: block 0 in this sector

How I perform this in my ongoing project

from Is it possible to lock command, protect cloning or not erasable by other app for MIFARE card 1k